Apelila 4000W LED Plant Grow Light Panel for Indoor Plants Veg and Flower

The specifications of the grow light are as follows: The PPF (Photosynthetic Photon Flux) is 620 μmol/s, and the efficacy is 2.7 μmol/J. The maximum yield is 2.0 Lbs/two lights. The power consumption is 240W (2.1A at 110VAC or 0.5A at 240VAC). The light is equipped with 3000W LEDs, comprising 576 pieces (360 pieces of 3500K white LEDs, 200 pieces of Wideband Full RED LEDs, and 16 pieces of UV LEDs). The LED chips used are SANAN 2235*2, with a total chip area of 0.887 square inches.

The input power for the light is 100-240VAC, 50/60Hz, with a power factor of >0.9. The light spectrum covers the range of 380nm to 800nm, including 450nm, 660nm, and 730nm. The light spectrum during the vegetative stage (B:GY:R:FR) is 17%:43%:36%:2%, while during the flowering stage (B:GY:R:FR), it is 12%:30%:48%:10%.

The light is best suited for flowering and fruiting plants during their growth and flowering stages. The recommended mounting height is 12-20 inches above the canopy. The PPFD (Photosynthetic Photon Flux Density) is 430 μmol/m²/s during the vegetative stage (with a mounting height of 25 inches and a canopy coverage of 3x3ft) and 590 μmol/m²/s during the flowering stage (with a mounting height of 20 inches and a canopy coverage of 4x2ft).

The operating temperature range for the light is -20°C to 40°C, and it is designed for indoor use. The LED chip soldering pad temperature is 70°C (at a room temperature of 28°C). The power driver is housed in an aluminum casing with thermal sealant.

The light comes with a 3-year warranty and has a net weight of 3.2kg (7lbs). The light dimensions are 23.6 inches (L) x 14.2 inches (W) x 4 inches (H). To achieve the best harvest, it is recommended to use 2-3 of these lights for a 4x4ft grow area, hanging them 20 inches from the plants, which can outperform a 1000W HPS light.

It is important to note that for optimal growth, the grow room should be maintained at a temperature between 68°F and 86°F, especially during the winter months, as the heat output from LED lights is relatively low.

The company has conducted uninterrupted actual planting tests in their factory, using the grow light alongside CMH and DE HPS lights, constantly adjusting the spectrum and efficacy to design the best LED grow light. The high PPF efficiency design of the light, with a 2.7 μmol/J PPF efficacy, outperforms CMH/CDM (1.6 μmol/J) and DE HPS (1.8 μmol/J) lights. The use of SANAN 2235 dual chips and 576 LEDs, along with a 1% light decay nano-waterproof coating, allows growers to achieve a 40% higher yield compared to older LED grow lights.

The light's spectrum is designed to mimic the characteristics of CMH/CDM and HPS lights. During the seedling and vegetative stages, the spectrum (B:GY:R:FR=15%:45%:35%:2%) is similar to CMH/CDM, while during the flowering stage, the spectrum (B:GY:R:FR=12%:30%:48%:8%) has more red and far-red light, similar to HPS. This combination is known to be beneficial for professional growers, as CMH/CDM is great for the seedling and vegetative stages, and HPS ensures a very good harvest.

The company is a professional LED light manufacturer with a strong R&D team. They are committed to providing the best service, and if customers have any problems, they are encouraged to contact the company, as they will provide a completely satisfactory reply.

product information: